OBM-P420

42″ Dual-Channel PBP Monitor with 3G-SDI

  • Weight: 70.54 lbs
  • Dimensions: 38.89 x 25.15 x 8.26 in
  • Input Resolution: SD/HD/2K
  • Screen Size: 42″
  • Native Resolution: 1920×1080

Share

Share on facebook
Share on twitter
Share on linkedin
Share on email

The Postium OBM-P Series are true dual-channel monitors designed to display and compare 2 independent channels simultaneously in Picture-by-Picture Mode as illustrated below. The OBM-P Series encompasses seven models from 18” to 55” that accept up to 1080 60P signals displayed at native 1920×1080 resolution and are equipped with standard 3G/HD-SDI input interfaces (x2) as well as HDMI 1.3a and analog Component/Composite inputs.

Closed Captioning decode and display for CEA-708(HD-SDI closed captioning standard) and CEA-608(SD-SDI closed captioning standard) is supported via SDI input.

The Wipe Function allows two pictures to be displayed using a vertical WIPE pattern. This function is useful when picture detail of the two images must be examined on a pixel basis.

1:1 Scan in PBP Mode allows users to magnify either image of two inputs in PBP mode.

PBP Color Control Settings allow for adjustment of the color settings to either of the two channels as well as comparison of the two images. HDR / SDR Brightness, Contrast, Color Temperature, Camera LUT, and other color settings can be adjusted.

This unique function allows users to display the same image side-by-side, change the color settings to one image, and then compare the original image and the changed image on the screen.


Dual Waveform Monitor & Vector Scope Mode 
allows display of Waveform and Vector Scope for the two different SDI inputs simultaneously.


Display Functions

High Dynamic Range (HDR) Emulation applies a High Dynamic Range display gamma curve to HDR content. The OBM-P Series supports PQ EOTF (SMPTE ST 2084), Hybrid Log Gamma and S-Log3. Postium’s HDR function allows users to view both highlights and shadow details within scenes simultaneously, thus resulting in more natural and realistic reproduction.


SDR/HDR Display mode provides both full-frame HDR and SDR viewing as well as simultaneous side-by-side split screen comparison.

In addition, the OBM-P series has Built-in Camera Log to Linear conversion LUTs from various camera manufacturers including Log-C, C-Log / S-Log2, S-Log3 / J-Log1 and more. Plus, custom 3D LUTs (32^³ and 64^³ cube files) can be imported for accurate and consistent color matching between different displays and for DIT previews of customized ‘looks’ that have been created by 3rd party color-grading applications.

The LUT-converted content can then be output to downstream devices/monitors via the SDI loop out.

Focus Assist controls the aperture level of a video signal and displays images on screen with sharpened edges highlighted to assist camera focus.

False Color indicates the Luma (Y) level of the input image. If a certain Y level is set, the pixels with the designated Luma (Y) level are displayed with a zebra pattern or a color pattern. There are display modes – Zebra, Variable, ARRI, and Comparison.

Gamut Error Type can be observed in 3 modes. In Type 1, when the targeted color space is selected as BT.709, the pixels outside of the targeted color space are displayed as Black Zebra.

The pixels over Y Maximum, Chroma Maximum, RGB Maximum are displayed as Black Zebra, and the pixels below Y Minimum, Chroma Minimum, RGB Minimum are also displayed as Black Zebra.


In Type 2, when the targeted color space is selected as BT.709, the pixels outside of the targeted color space are displayed as Black or White Zebra.


The pixels over Y Maximum, Chroma Maximum, RGB Maximum are displayed as Black Zebra, and the pixels below Y Minimum, Chroma Minimum, RGB Minimum are displayed as White Zebra.

In Type 3: Mono, when the targeted color space is selected as BT.709, the pixels inside of the targeted color space are displayed as Mono, and the pixels outside of the targeted color space are displayed as the color. In this type, black and white area is not recognized.

HDR Waveform Monitor and Vector Scope Display modes enable users to monitor sources using the internal Waveform and Vector Scope individually or simultaneously.

The position of Waveform and Vector Scope can be moved between Top Left, Top Right, Bottom Right, and Bottom Left.

When HDR mode is set on, HDR Waveform is displayed on screen.

Adjustable Gamma control allows for incremental compensation between gamma correction values of 1.0 and 3.0 — thereby ensuring that the decoded image isn’t too bright (no gamma correction) or too dark (over correction).

In-Monitor Display (IMD) Function allows image source names and tally information to be displayed on the screen, with an external remote function via Ethernet. TSL system protocol is supported. The color of the source name and tally color is selectable among White, Red, Green, Blue, Yellow, Cyan, Magenta.

Various Frame Markers/Mattes are available on the OBM-P series, including aspect, area, and center markers. In addition, the detailed display settings of each marker are allowed. For example, the color, brightness, horizontal/vertical position, and thickness of aspect markers can all be adjusted.


Remote Control via Ethernet
 allows all OBM-P Series monitors to be connected via Ethernet and controlled remotely on the network. The System Date Copy Function allows users to save the monitor configuration and adjustment settings and load them to other monitors. This is useful for multiple monitor systems, allowing the transfer of one monitor’s setup and adjustment data to another or many.

ITEMS OBM-P420
INPUT
2 X BNC 3G / HD / SD-SDI-1/2
1 X HDMI HDMI 1.3a
3 X BNC (YPbPr) Analog(YPbPr)
1 X BNC (CVBS) Composite
OUTPUT
2 X BNC 3G / HD / SD-SDI-1/2
INPUT SIGNAL FORMAT
SMPTE ST 425-AB 1080p(60/59.94/50/30/29.97/25/24/23.98/30sF29.97sF/25sF/24sF/23.98sF) / 1080i (60/59.94/50)
SMPTE ST 372 1080p(60/59.94/50/30/29.97/25/24/23.98/30sF29.97sF/25sF/24sF/23.98sF) / 1080i (60/59.94/50)
SMPTE ST 274 1080i (60/59.94/50) / 1080p(30/29.97/25/24/24sF/23.98/23.98sF)
SMPTE ST 296 720p(60/59.94/50)
SMPTE ST 260 1920 x 1035i(60/59.94)
SMPTE ST 2048 2048 x 1080p(24/24sF/23.98/23.98sF)
SMPTE ST 125 480i(59.94)
ITU R-BT.656 576i(50)
HDMI ~ 1080p(60)
AUDIO IN / OUT
1 x Phone Jack In Line In(Stereo)
1 x Phone Jack Out H/P Out(Front, Stereo)
2 x Speaker Out -
DISPLAY
Size 42" LCD
Resolution 1920 x 1080 (16:9)
Pixel Pitch 0.484mm
Color 1.064B Colors (8bit+2bit FRC)
Viewing Angle 178(H), 178(V)
Luminance of White 700cd/m²
Contrast 4000:1
Display Area (HxV) 930.24 x 523.26 (mm)
GENERAL
1 x Ethernet Control/Update, RJ-45P Input
1 x GPIO GPI-7 Port, RJ-45P Jack
2 x Serial RS-422 Jack, RJ-45P Input / Output
1 x USB For Firmware Update, Color Calibration
Power Requirements AC(100V~240V,50/60Hz)
Power Consumption 156W
Operating Temperature 0°C ~ 40°C (32°F ~ 104°F)
Operating Humidity 20% ~ 80% RH
Weight 32kg / 70.54lbs
Dimensions (WxHxD) With Stand : 988 x 639 x 210mm / 38.89 x 25.15 x 8.26inch
Accessories Power Cable
Option Wall Mount Kit / Carrying Case

* Specifications may be changed without notice.