Company top image
  • • High Dynamic Range(HDR) Display Function
  • The OBM series provides the function to display the High Dynamic Range footage.
    Postium HDR function allows users to view both highlights and shadow detail of scenes at tha same time, thus resulting in more natural and realistic images.
    The OBM series supports PQ EOTF (SMPTE ST 2084), Hybrid Log Gamma and S-Log3.
  • High Dynamic Range(HDR) Display Function image
  • OBM-HDR provides the function of comparing HDR and SDR(Standard Dynamic Range) on the displayed image on the OBM series simultaneously.
  • High Dynamic Range(HDR) Display Function image
  • • Focus Assist
  • This function controls the aperture level of a video signal, and displays images on screen with sharpened edges to help camera focus operation.
  • • Fast Mode
  • This function minimize the interlaced video processing time delay. This mode is also useful when displaying fast-motion interlaced video content and when reducing the delay between video and audio. (* OBM-U170 model is only supported.)
  • Internal Video Processing Time
    Fast Mode image
  • • False Color
  • This function evaluates the Luma(Y') level of the input image. If the certain Y' level is set, the pixels with the designated Luma(Y') level are displayed with the zebra pattern or the color pattern. There are three modes in OBM False Color.
  • False Color image
  • • Adjustable Gamma
  • Gamma value is adjustable from 1.0 to 3.0 as user's preference to monitor in the dark area of the picture.
    Any pictures taken in either light or dark environment can be easily watched or analyzed.
  • Adjustable Gamma image
  • • Camera Log Selection
  • The OBM series has the integrated camera LUT of the various camera manufacturers. It allows users to load the following camera logs.
    Log-C / C-Log / S-Log2, S-Log3 / J-Log1 The more camera LUTs will be updated.
  • • Camera Log Mapped SDI Loopout
  • This function allows to load the camera log to the original image and then send the camera log mapped image to another monitor through SDI loop out.
  • Camera Log Mapped SDI Loopout image
  • • Remote Control via Ethernet
  • The OBM series can be connected via Ethernet connection and controlled remotely on the network.
  • Remote Control via Ethernet image
  • • Closed Caption
  • The OBM series can display closed captions with an SDI input. It supports the CEA-708(HD-SDI closed captioning standard) and CEA-608(SD-SDI closed captioning standard).
  • • Waveform & Vector Scope Position Changeable
  • The position of Waveform and Vectro Scope can be changed among Left Top, Right Top, Right Bottom, Left Bottom.
  • Waveform & Vector Scope Position Changeable image
  • • Waveform, Vector Scope Size Adjustable
  • The image size of Waveform and Vector Scope can be changed between Small and Large.
  • Waveform, Vector Scope Size Adjustable image
  • • System Date Copy
  • This function allows users to save the monitor configuration and adjustment settings on the USB memory stick and load them to other monitors. This is useful for multiple monitor systems, allowing the transfer of one monitor’s setup and adjustment data to another.
  • • Various Markers
  • The OBM series can display various markers, including aspect marker, area marker, and center marker. In addition, the detailed display settings of each marker are allowed. For example, the color, brightness, horizontal/vertical position, and thickness of aspect markers can all be adjusted.
  • Various Markers image
  • • PBP(Picture-by-Picture) Function
  • The unique Picture-by-Picture function of the OBM P series allows two different SDI input signals to be displayed on the screen simultaneously. This function is very convenient for making instant adjustments to two input sources, because there is no need to individually adjust the different characteristics of two monitors. The OBM P series offers the various Picture-by-Picture modes as follows.
  • PBP(Picture-by-Picture) Function image
  • • 1:1 Scan in PBP Mode
  • This function allows to magnify the either image of the two inputs in PBP mode.
  • 1:1 Scan in PBP Mode image
  • • HDR Waveform
  • When HDR more is set on, HDR Waveform is displayed on screen.
  • HDR Waveform image
  • • Dual Waveform Monitor & Vector Scope
  • The OBM P series can display Waveform, Vector Scope on the two different SDI videos respectively, which is very useful and convenient for dual monitoring.
  • Dual Waveform Monitor & Vector Scope image
  • • WIPE
  • The area of the two pictures to be displayed is selected using a vertical WIPE pattern. This function is useful when picture detail of the two images must be examined on a pixel basis.
  • WIPE image
  • • In-Monitor Display(IMD) Function
  • The image source names and tally information can be displayed on the screen, with an external remote function via Ethernet. The TSL system protocol is supported. The color of the source name and tally color can be selectable among White, Red, Green, Blue, Yellow, Cyan, Magenta.
  • In-Monitor Display(IMD) Function image
  • • Color Settings Adjustable to Either of Two Images in PBP Mode
  • The OBM PBP function allows to adjust the color settings to either of the two imanges and compare the two images. HDR / SDR Brightness, Contrast, Color Temperature, Camera Lut, and other color settings can be changed.
  • Color Settings Adjustable to Either of Two Images in PBP Mode image
  • This unique function allows to display the same image side by side, change the color settings to one image, and then compare the original image and the changed image on the screen.
  • Color Settings Adjustable to Either of Two Images in PBP Mode image
  • • Password Lock for User Preset
  • When multiple users share the same monitor, each user can register his/her own password for color temperature and user preset data. This ensures the users correctly recall their preset data, and keep preset information safe from unauthorized use.
  • • Custom 3D LUT File Import
  • The OBM series allow the user to import 3D Look-up Table for accurate and consistent color matching between individual displays as well as using customized ‘looks’ that have been created by 3rd party color-grading applications. 32ˆ³ and 64ˆ³ cube file are supported.
  • Various Markers image
  • OBM-P180
  • OBM-P180 image
  • OBM-P180 image
  • OBM-P210
  • OBM-P210 image
  • OBM-P210 image
  • OBM-P240
  • OBM-P240 image
  • OBM-P240 image
  • OBM-P310
  • OBM-P310 image
  • OBM-P310 image
  • OBM-P420
  • OBM-P420 image
  • OBM-P420 image
  • OBM-P460
  • OBM-P460 image
  • OBM-P460 image
  • OBM-P550
  • OBM-P550 image
  • OBM-P550 image

OBM P SERIES SPECIFICATION

ITEMS OBM-P180 OBM-P210 OBM-P240 OBM-P310 OBM-P420 OBM-P460 OBM-P550
INPUT
2 X BNC 3G-SDI-1/2
1 X HDMI HDMI 1.3a
3 x BNC (YPbPr) Analog(YPbPr)
1 x BNC (CVBS) Composite
OUTPUT
2 x BNC 3G / HD / SD-SDI-1/2
INPUT SIGNAL FORMAT
SMPTE ST 425-AB 1080p(60/59.94/50/30/29.97/25/24/23.98/30sF29.97sF/25sF/24sF/23.98sF) / 1080i (60/59.94/50)
SMPTE 274/292 1080i (60/59.94/50) / 1080p(30/29.97/25/24/24sF/23.98/23.98sF)
SMPTE 296 720p(60/59.94/50)
SMPTE 260 1035i(60/59.94)
SMPTE ST 2048 2048 x 1080p(24/24sF/23.98/23.98sF)
SMPTE ST 125 480i(59.94)
ITU R-BT.656 576i(50)
HDMI ~ 1080p(60)
AUDIO IN / OUT
1 x Phone Jack In Line In(Stereo)
1 x Phone Jack OUT H/P Out(Front, Stereo)
2 x Speaker Out Stereo
DISPLAY
Size 18.5" 21" 24" 32" 42" 46" 54.6"
Resolution 1920 x 1080 (16:9) 1920 x 1080 (16:9) 1920 x 1200 (16:10) 1920 x 1080 (16:9) 1920 x 1080 (16:9) 1920 x 1080 (16:9) 1920 x 1080 (16:9)
Pixel Pitch 0.213mm 0.248mm 0.270mm 0.363mm 0.484mm 0.5304mm 0.630mm
Color 1.064B Colors
(8bit+2bit FRC)
1.064B Colors
(8bit+2bit FRC)
1.064B Colors
(8bit+2bit FRC)
1.064B Colors
(8bit+2bit FRC)
1.064B Colors
(8bit+2bit FRC)
1.064B Colors
(8bit+2bit FRC)
1.064B Colors
(8bit+2bit FRC)
Viewing Angle 178(H), 178(V) 178(H), 178(V) 178(H), 178(V) 178(H), 178(V) 178(H), 178(V) 178(H), 178(V) 178(H), 178(V)
Luminance
of White
350cd/m² 250cd/m² 300cd/m² 450cd/m² 700cd/m² 700cd/m² 700cd/m²
Contrast 1000:1 1000:1 1000:1 3000:1 4000:1 4000:1 4000:1
Display Area 408.96 x 230.04(mm) 476.64 x 268.11(mm) 518.4 x 324.0(mm) 698.4 x 392.85(mm) 930.24 x 523.26(mm) 1018.08 x 572.67(mm) 1209.6 x 680.4(mm)
GENERAL
1 x Ethernet Control/Update, RJ-45P Input / Output
1 x GPIO GPI-7 Port, RJ-45P Jack
2 x Serial RS-422 Jack, RJ-45P Input / Output
1 x USB For Firmware Update, Color Calibration
Power
Requirements
AC(100V~230V,50/60Hz)
/ DC 12V
AC(100V~230V,50/60Hz)
/ DC 24V
AC(100V~230V,50/60Hz)
Power
Consumption
MAX 40W MAX 100W 156W 220W 283W
Operating
Temperature
0°C ~ 40°C (32°F ~ 104°F)
Operating
Humidity
20% ~ 80% RH
Weight 6.7kg / 14.77lbs 8.5kg / 18.73lbs 10.5kg / 23.14lbs 22kg / 48.50lbs 32kg / 70.54lbs 35kg / 77.16lbs 37kg / 81.57lbs
Dimension
with Stand
(WxHxD)
470 x 335 x 120mm
18.50 x 13.18 x 4.72inch
538 x 363 x 120mm
21.18 x 14.26 x 4.72inch
600 x 430 x 130mm
23.62 x 16.92 x 5.11inch
749 x 507 x 176mm
29.48 x 19.96 x 6.92inch
988 x 640 x 300mm
38.89 x 21.19 x 11.81inch
1074 x 687 x 300mm
42.28 x 27.04 x 11.81inch
1258 x 815 x 270mm
49.52 x 32.08 x 10.62inch
Accessories Power Cable
Option Carrying Case / Sun Hood / Acrylic Protector / V-Mount / Rack Mount Kit Wall Mount Kit / Carrying Case

* Specifications may be changed without notice.